 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| www.SunLED.com Part Number: ZMEBGGBBG61W 3.2X3.6mm FULL-COLOR SURFACE MOUNT LED LAMP PRELIMINARY SPEC Features LOW POWER CONSUMPTION. 3.2mmx3.6mm SMT LED, 1.1mmTHICKNESS. CAN PRODUCE ANY COLOR IN VISIBLE SPECTRUM, INCLUDING WHITE LIGHT. ONE ORANGE, ONE GREEN AND ONE BLUE CHIPS IN ONE PACKAGE. PACKAGE : 1000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute maximum ratings (TA=25C) Reverse Voltage Forward Current Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width Power Dissipation VR IF iFS PT ME (InGa AlP) 5 30 195 75 BGG (InGa N) 5 30 100 120 1000 -40 ~ +85 -40 ~ +85 BBG (InG aN) 5 30 100 120 1000 Operating Characteristics (TA=25C) Forward Voltage (Typ.) (IF=20mA) Forward Voltage (Max.) (IF=20mA) Reverse Current (Max.) (VR=5V) Wavelength of Peak Emission (Typ.) (IF=20mA) Wavelength of Dominant Emission (Typ.) (IF=20mA) Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Capacitance (Typ.) (VF=0V, f=1MHz) Luminous Intensity (IF=20mA) mcd min. typ. 297 248 148 VF VF IR BGG ME (InGaA (InGa N) lP) 2.0 2.5 10 3.2 4.0 10 BBG (InG aN) 3.2 4.0 10 Unit V V uA Unit V mA mA mW V C p 630 520 468 nm D 621 525 470 nm Electrostatic Discharge Threshold (HBM) Operating Temperature Storage Temperature TA Tstg 20 35 21 nm C 25 100 100 pF Part Number Emitting Color Emitting Material Lens-color Wavelength nm P Viewing Angle 2 1/2 Red ZMEBGGBBG61W Green Blue Published Date :FEB 25,2008 InGaAlP InGaN InGaN Drawing No : SDSA4333 Water Clear 110 110 50 V3 630 520 468 P.1/6 120 Checked : B.L.LIU www.SunLED.com Part Number: ZMEBGGBBG61W 3.2X3.6mm FULL-COLOR SURFACE MOUNT LED LAMP ME Published Date :FEB 25,2008 Drawing No : SDSA4333 V3 Checked : B.L.LIU P.2/6 www.SunLED.com Part Number: ZMEBGGBBG61W 3.2X3.6mm FULL-COLOR SURFACE MOUNT LED LAMP BGG Published Date :FEB 25,2008 Drawing No : SDSA4333 V3 Checked : B.L.LIU P.3/6 www.SunLED.com Part Number: ZMEBGGBBG61W 3.2X3.6mm FULL-COLOR SURFACE MOUNT LED LAMP BBG Published Date :FEB 25,2008 Drawing No : SDSA4333 V3 Checked : B.L.LIU P.4/6 www.SunLED.com Part Number: ZMEBGGBBG61W 3.2X3.6mm FULL-COLOR SURFACE MOUNT LED LAMP Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity/ Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date :FEB 25,2008 Drawing No : SDSA4333 V3 Checked : B.L.LIU P.5/6 www.SunLED.com Part Number: ZMEBGGBBG61W 3.2X3.6mm FULL-COLOR SURFACE MOUNT LED LAMP PACKING & LABEL SPECIFICATIONS ZMEBGGBBG61W Published Date :FEB 25,2008 Drawing No : SDSA4333 V3 Checked : B.L.LIU P.6/6 |
Price & Availability of ZMEBGGBBG61W
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |